Teaching Faculty

HOD

Dr. V. Christus Jeya Singh

Professor & Vice Principal

Department of Mechanical Engineering

Email: jeyasingh@sxcce.edu.in
Contact No.:- +91 4652 232560 , Extn. 161

Dr. V. Christus Jeya Singh graduated in Bachelor of Engineering in 1995 from Manonmaniam Sundaranar University, Tirunelveli. He obtained his Masters Degree (M.E.) in Thermal Engineering from Madurai Kamarajar University in the year 1996. He has been awarded the Ph.D. by Anna University, Chennai. He has been the Head of Department of Mechanical Engineering at St.Xavier’s Catholic College of Engineering since 1998. He has about twenty years of teaching experience in engineering institutions. His area of interest includes thermal engineering, energy technology, biomass gasification, etc,. He has guided several projects to the under graduate and post graduate students. He has published more than ten research articles in Journals and conferences, out of which six were published in reputed international journals. He has attended more than twenty seminar/workshop/faculty development program and organized three workshops. He is a member of many professional bodies including Institution of Engineering and Technology (IET), Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), Society of Automotive Engineers (SAE) and Indian Society for Technical Education (ISTE).

miracules

Dr. G. Antony Miraculas

Associate Professor & HOD

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

Dr. G. Antony Miraculas graduated in Bachelor of Engineering in 2000 from Manonmaniam Sundaranar University, Tirunelveli. He obtained his Masters Degree (M.E.) in Thermal Engineering from Bharathiar University in the year 2001. He has been awarded the Ph.D. by Anna University, Chennai in the year 2015. He is working as an assistant professor in the Department of Mechanical Engineering at St.Xavier’s Catholic College of Engineering since 2006. He has about fourteen years of teaching experience in engineering. He is an approved supervisor of Anna University in the faculty of mechanical engineering. His area of interest includes renewable energy, biofuels, etc,. He is a member of  professional bodies such as Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE)  and Indian Society for Technical Education (ISTE).

Untitled-3

Dr. Ajith J Kings

Associate Professor

Department of Mechanical Engineering

Email: ajith@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 164

Dr. Ajith J Kings graduated in Mechanical Engineering and then received post graduation degree in CAD/CAM. He is involved in teaching and research for more than eleven years in engineering institutions and 2 years of industrial experience. Currently involved in developing alternative fuels from third generation algae feedstocks for biodiesel generation. He has good publications in international SCI journals and is a life time member of Indian Society for Technical Education (ISTE). He has taught various courses related to Mechanical Engineering, well versed in software packages such as ANSYS, IDEAS, Pro-E, AutoCAD, etc. and familiar with optimization techniques. He has organized technical seminars and workshops.

felix

Dr. M. Felix Xavier Muthu

Associate Professor

Department of Mechanical Engineering

Email: felixxavier@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 167

Dr. M. Felix Xavier Muthu was graduated in Mechanical Engineering in 2002. He obtained his master degree in Manufacturing Engineering from National Engineering College, Kovilpatti in 2004. He obtained his Ph.D. in Welding Technology from Anna University, Chennai in the year 2015. He has more than thirteen years of teaching and research involvement in engineering institutions. He is an approved supervisor of Anna University in the faculty of Mechanical Engineering. His area of interest includes Welding Technology, Material Sciences and Mechanical Testing.

Jebeen Moses

Dr. J. Jebeen Moses

Associate Professor

Department of Mechanical Engineering

Email: jebeen@sxcce.edu.in

Contact No.:- +91 4652 232560 , Exn. 165

Dr. J. Jebeen Moses was graduated in Mechanical Engineering and Master degree in CAD/CAM. He obtained Ph.D in Metal matrix composites at Anna University, Chennai. He has sixteen years of teaching and research involvement in engineering institutions. He has taught various courses related to Mechanical Engineering and experienced in software like Inventor, Fusion360, Solidworks, AutoCAD, etc. He has organized many technical seminars and workshops.

jerald

Dr. M. Gerald Arul Selvan

Associate Professor

Department of Mechanical Engineering

Email: jerald@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 162

Dr. M. Gerald Arul Selvan was graduated in Mechanical Engineering and Post graduated in Manufacturing Engineering. He completed Ph.D in Anna University, Chennai. He has published research papers in reputed journals. He has been in the teaching profession for the past 8 years. Currently , he is working as Assistant Professor in St.Xavier’s Catholic College of Engineering, Nagercoil, Tamil Nadu. His area of interest is Composite materials.

ganarajan

Mr. J. Gnana Rajan

Assistant Professor

Department of Mechanical Engineering

Email:

Contact No.:- +91 4652 232560

Mr. J. Gnana Rajan was graduated in Mechanical Engineering  and  Master degree in CAD/CAM from Mepco Schlenk Engineering College, Sivakasi, India in the year 2011. He has more than twenty five years of teaching and research involvement in engineering institutions and he has taught various courses related to Mechanical Engineering.. He has organised many technical seminars and workshops. His area of interest is in composite materials.

vijumon

Mr. V. T. Vijumon

Assistant Professor & Deputy COE

Department of Mechanical Engineering

Email: vijumon@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 165

Prof. V. T. Vijumon graduated in Bachelor of Engineering in 2002 from Manonmaniam Sundaranar University, Tirunelveli. He obtained his Masters Degree (M.Tech.) in Advanced Manufacturing from SASTRA University, Tanjore in the year 2005.He is working as an assistant professor in the Department of Mechanical Engineering at St.Xavier’s Catholic College of Engineering since 2005.He has fourteen years of teaching and research involvement in engineering institutions. He has taught various courses related to Mechanical Engineering and experienced in software like Solidworks, AutoCAD, etc. He has organized many technical seminars and workshops.He is a member of Indian Society for Technical Education (ISTE).

forster

Dr. M. Antony Forster Raj

Assistant Professor

Department of Mechanical Engineering

Email: forster@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 167

Dr. M.Antony Forster obtained his B.E degree in Mechanical Engineering from RVS college of Engg, Dindigul, and M.E. degree in Industrial Engineering from Thiagarajar college of Engg,Madurai, both affliated to Madurai Kamaraj University,He is the reciepient of 3rd prize in the National Student's Design Competition. Currently he is doing his PhD in Anna University .His industrial career spans over 7 and odd years in leading Industries in the capacities of Engineer, Asst. Manager in India & Manager in the Kingdom of Bahrain. He has 17 and odd years of experience in teaching.which is inclusive of his experience in Institut Megatech,KualaLumpur, Malaysia and 2 other engg colleges in the vicinity of Nagercoil. He is teaching various courses related to Mechanical Engg and had organised many technical seminars and workshops. He also had been in the shoes of a placement officer for brief period of time. Currently he is the coordinator for ISHRAE student's chapter at St.Xavier's Engg College.

IMG_20230328_211020 (1)

Mr. P. Jose Aloysius

Assistant Professor

Department of Mechanical Engineering

Email: jose@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 163

Mr. P. Jose Aloysius was graduated in Mechanical Engineering  and Master degree in CAD. He has more than fifteen years of teaching and research involvement in engineering institutions and 2 years of industrial experience. He has taught various courses related to Mechanical Engineering and experienced in software like AutoCAD, Inventor, Fusion360, Solidworks, Ansys, EdgeCAM, SolidEdge, CFD, etc. He has organised many technical seminars and workshops.

balto

Dr. Y. Balto

Assistant Professor

Department of Mechanical Engineering

Email: balto@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 167

Dr. Y.Balto received his B.E. Degree (Mechanical Engineering) from Jeyamatha Engineering, affiliated to Manonmanium Sundaranar University, Thirunelveli and his M.E Degree (Computer Integrated Manufacturing) in College of Engineering Guindy, Anna University and completed his Ph.D (Energy Efficient Buildings) in Anna University, Chennai. He was done master’s degree project work at IIT-M under the research area of synthesis of nano particles and its characterization and the work was published in international level referred journal. He joined as Assistant Professor in St.Xavier’s catholic college of engineering during the year 2010. Before joining this institution, he gained seven years of teaching experience from various engineering institutions in tamilnadu, India. He has guided more than 30 M.E/M.Tech students and many B.E. students for their Project Works. His major research work includes heat flux reduction in buildings, heat load estimations, developing novel thermal insulation materials and synthesis & characterization of Nano materials. His areas of interest are energy efficient buildings, heat transfer, nano & composite materials, finite element analysis and advances in manufacturing engineering.

Being Tamil as his mother tongue, he is proficient in English and Malayalam languages. His hobbies are reading books, and delivering motivational talks to students.

ajin

Mr. M. L. Ajin

Assistant Professor

Department of Mechanical Engineering

Email: ajin@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 116

Mr. M. L. Ajin was Graduated in Mechanical Engineering, Post graduated in Engineering Design and doing Ph.D in Metal Matrix Composites using Nano Materials. He has been in the teaching profession for the past ten years. Currently, he is working as an Assistant Professor in St. Xavier's Catholic College of Engineering, Nagercoil, Tamil Nadu, India. He holds scientific papers from reputed international journals and attended many international conferences and workshops. His areas of interest are CAD, Renewable Energy, Nano Materials and Nano fluids in heat transfer application.

anwar1

Mr. M. M. Anwar Rajesh

Assistant Professor

Department of Mechanical Engineering

Contact No.:- +91 4652 232560 , Extn. 167

Mr. M. M. Anwar Rajesh was graduated in Mechanical Engineering and Post graduated in Manufacturing Engineering. He has been in the teaching profession for the past 12 years. Currently , he is working as Assistant Professor in St.Xavier’s Catholic College of Engineering, Nagercoil, Tamil Nadu. His area of interest is Composite materials.

Untitled-2

Mr. M. Anto Xavier Roche

Assistant Professor/Placement Officer

Department of Mechanical Engineering

Contact No.:- +91 4652 232560 , Extn. 302

Mr. M. Anto Xavier Roche was graduated in Mechanical Engineering and Post graduated in Manufacturing Engineering. He has been in the teaching profession for the past ten years. Currently , he is working as Assistant Professor in St.Xavier’s Catholic College of Engineering, Nagercoil, Tamil Nadu. He has taught various courses related to Mechanical Engineering and experienced in software like Solidworks, AutoCAD, etc. He has organised many technical seminars and workshops.

tittu

Mr. D. X. Tittu George

Assistant Professor

Department of Mechanical Engineering

Email: georgetittu@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 116

He has graduated with honours in Mechanical Engineering in the year 2012 from Udaya School of Engineering, Kanyakumari which is affiliated to Anna University, Chennai. He has received master’s degree in Energy Engineering with honours in the year 2014 from St.Xavier’s Catholic college of engineering, which is affiliated to Anna University, Chennai. He has joined St.Xavier’s Catholic college of engineering in the year 2015 and has a teaching experience of about 4 years. He is currently doing research in the area of Solar-Wind energy and Grid integration.

AJX

Mr. Anitto Joe Xavier

Assistant Professor

Department of Mechanical Engineering

Email: anitto@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 163

Mr. A. Anitto Joe Xavier was graduated in Mechanical Engineering in the year 2017 from St.Xavier’s Catholic College of Engineering, Nagercoil, TamilNadu. He has received master’s degree in Manufacturing Engineering in the year 2019 from MET Engineering College, Kanyakumari. He has been in the teaching profession for the past one year. Currently, he is working as Assistant Professor in St. Xavier's Catholic College of Engineering, Nagercoil, TamilNadu, India. He is currently doing research in the area of Composite Materials. Also he is acting as Department Placement Co-ordinator.

mic 2

Mr. T. Michel Raj

Assistant Professor

Department of  Mechanical Engineering

Email: michelraj@sxcce.edu.in

Contact No.:- +91 4652 232560 , Extn. 162

Mr. T. Michel Raj was graduated in Mechanical Engineering in the year 2011 from University College of Engineering, Nagercoil, TamilNadu. He has received master’s degree in Engineering Design in the year 2013 from Government College of Engineering, Tirunelveli, TamilNadu. He has been in the teaching profession for the past eight years. Currently, he is working as Assistant Professor in St. Xavier's Catholic College of Engineering, Nagercoil, TamilNadu. He has taught various courses related to Mechanical Engineering and experienced in software like ANSYS.  He is currently doing research in the area of Polymer matrix Composites.

Photo

Dr. G. SHANTHOS KUMAR,

Assistant Professor,

Department of Mechanical Engineering,

Email: shanthos@sxcce.edu.in

Contact No.:- +91 4652 232560, Extn. 162

Dr. G. Shanthos kumar was graduated in Mechanical Engineering and post graduated in Engineering Design. He has done Ph.D. degree from Annamalai University in 2021. He has four years of teaching experience and five years of research experience in various engineering institutions. Currently, he is working as Assistant Professor in the department of Mechanical Engineering, Nagercoil. He got UGC-BSR Research Fellowship during his research period. He has published ten research articles in various reputed journals, out of which seven articles in SCI journals list. He has attended many international and national conferences/workshop/FDP’s. His area of interest is Materials Joining Process, Materials Characterization, Testing of Materials, and Finite Elements Analysis.

IMG-20230925-WA0005

Mrs. J ANIKKA NAYAGI HEMARINA,

Assistant Professor,

Department of Mechanical Engineering,

Email: anikka@sxcce.edu.in

Contact No.:- +91 4652 232560, Extn. 162

Mrs. J. Anikka Nayaki Hemarina was Graduated in Aeronautical Engineering in the year 2018 from Kumaraguru College of Technology, Coimbatore. She has received Master’s degree in Engineering Design  in the year 2021 from Government College of Engineering, Tirunelveli. She is pursuing PhD in functionally graded materials at Anna University, Chennai. Currently, she is working as Assistant Professor in St. Xavier's Catholic College of Engineering, Nagercoil, TamilNadu, India.

Teaching Assistant

DSC0463

Mrs. C. Kalaiselvi

Driving Instructor

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

DSC0450

Mr. D. T. Rose Robin

Skilled Assistant

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

DSC0448

Mr. O. Jaya Singh David

Skilled Assistant

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

DSC05121

Mr. J. Amal Raj

Skilled Assistant/Driving Instructor

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

Mr. M. Jeya Sekhar

Skilled Assistant

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

jegan-1

Mr. S. Jehan

Skilled Assistant/Driving Instructor

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

??????

Mr. D. Amal

Skilled Assistant

Department of Mechanical Engineering

Contact No.:- +91 4652 232560

Mr. D. Amal has completed Diploma in Mechanical Engineering in 1999 under Tamilnadu Technical board, Chennai. He has eight years of Industrial experience. Currently he is working as Skilled Assistant in St. Xavier's Catholic College of Engineering, Nagercoil, Tamilnadu.

Mr. John

Office Assistant

Department of Mechanical Engineering

Contact No.:- +91 4652 232560